LV SWITCHGEARS
Product Range
Main Distribution Boards upto 6300A
Sub main Distribution Board / Final Distribution Board
Motor Control Centers and VFD Panels
PLC Panels, BMS Panels
AMF and Synchronization Panel
APFC Panels
LV AC Distribution Board / Feeder Pillars upto 3000A
Flange Connected Feeder Pillars upto 3000A
Service Cabinet / Mini Feeder Pillar
Street Lighting Control Cabinets
Customized products to meet specific requirement.
- Low Voltage Switchgear (Main Distribution Board)
- Motor Control Centres and VFD/Soft Starter Panels
- Sub Main Distribution Board
- Distribution Board
- PLC Panels and BMS Panels
- AMF and Synchronization Panel
- APFC Panels
- Flange Connected Feeder Pillar
- Feeder Pillars Type A & Type B
- Street Lighting Control Cabinet
400V-1000V, 1000-6300A, 105kA/1sec Low Voltage Switchgear (Main Distribution Board)
LV switchgears are designed for energy distribution at each level, as well as control and protection of electrical devices against short-circuit and overload effects. They can be used as primary or sectional switchgears, or as control cabinets.
Our Low Voltage Switchgear division is highly capable to provide Motor Control Centres (MCC) consists of DOL starters, Star-Delta starts, Soft Starts and VFD Drive panels as per the project requirements and customer specifications.
Types | Form II, III and IV |
Assembly | Fixed / Draw-out |
Installations | Indoor |
Current Rating | Up to 6300A, |
Short Circuit Rating | 105 kA for 1 sec |
Incomer Device | ACB/MCCB/Isolator |
Outgoing | MCCB/DOL/Star-Delta/VFD/SS |
Metering | A, V, PF, kWh, Energy Analyser, Hz, etc. |
Busbar | Tinned Copper |
Enclosure | Powder Coated Sheet Steel |
Application : Building & Industrial Sector
Operational Conditions : Indoor
Degree of Protection : IP 30 / IP 43
Rating : up to 800A
Mounting : Wall mounted up to 630A
Form of Construction : Form 2
Rated short Circuit Rating : 36kA for 1sec.
No. of Ways : 4,8,12
Metering : Available as per requirement.
Incomer / Outgoings : Moulded Case Circuit Breakers
Application : Building & Industrial Sector
Operational Conditions : Indoor
Rating : up to 125A
Mounting : Wall mounted
Form of Construction : Form 2
Rated short Circuit Rating : 20kA for 0.2sec.
Type : Row type & VTPN
Incomer : Isolator/ MCCB
Outgoings : Miniature Circuit Breakers
PLCs are used in factories and industrial plants to control motors, pumps, lights, fans, circuit breakers and other machinery. Integrated PLC Panel can monitor any process and provide data to SCADA and other supervisory control systems.
Building Management System (BMS), otherwise known as a building automation system (BAS), is a computer-based control system installed in buildings that controls and monitors the building's mechanical and electrical equipment such as ventilation, lighting, power systems, fire systems, and security systems.
Automatic mains failure (AMF) panels, often referred to as automatic transfer switch (ATS) panels, make the power switch to emergency standby Generators in the event of a significant loss of mains power or total blackout.
Synchronization panels are mainly designed and used to meet power system requirements. These panels function both manually and with an automatic synchronizing function for two or more generators or breakers.
APFC is an automatic power factor control panel which is used to improve the power factor, whenever required, by switching ON and OFF the required capacitor bank units automatically.
(Transformer Mounted)
Application : Utility Package Substations
Operational Conditions : Indoor
Degree of Protection : IP 43
Rating : 1000A / 1800A / 2700A
Incomer : Isolator / Copper links
Outgoing : Strip Fuse Switch Unit.
Application : Utility Distributions
Operational Conditions : Outdoor
Degree of Protection : IP 43
Rating : 800A
Incomer : Strip Fuse switch unit with knife blades
Outgoing : Strip Fuse switch unit with fuse link
Application : Street Lighting Controls
Operational Conditions : Outdoor
Degree of Protection : IP 55
Rating : 400A
Incomer : MCCB
Outgoing : MCCB with Contactors
Enclosure : GRP